Bed Riser Multi-Purpose 50mm

Each Mult-Purpose Bed Riser is capable of holding up to 1,000kg.

Made from Top Quality virgin ABS plastic resin

Height is 50mm and can be stacked 2 high to 100mm.

MANY USES

ROUND LEGS - Recessed top plate can accept round legs up to 75mm diameter

SQUARE LEGS - Recessed top plate can accept square legs up to 70mm x 70mm

RECTANGULAR LEGS - Recessed top plate can accept rectangular legs with the longest size no greater than 70mm

CASTOR WHEELS - Scalloped central well inside the top plate will accept castor wheels up to 38mm diameter and 50mm wide to prevent rolling

TUBULAR FRAMES - Special channel in the top plate allows square and round tubular frames up to 38mm to be located

SKID BASE SOLID ROD FRAMES - Special channel in the top plate allows solid rod frames up to 32mm to be located

DESKS WITH LEGS - Recessed top plate can accept square tube legs up to 70mm x 70mm

DESKS WITH SOLID PANEL LEGS - Special channel in the side of the top plate permits solid desk panels up to 15mm thick.  Corners can be positioned inside the top plate

WORKBENCHES - Workbenches within the size limitations noted above can be accommodated up to 1,000kg per riser

IMPORTANT

Stacking more than 2 risers high (100mm) is not recommended due to potential instability

All items should be located inside the top plate recess or within the prescribed channels.  Sitting items flush on the top is not recommended due to potential instability.